Hot ImagesHot ImagesHot ImagesHot ImagesHot Images
Hot ImagesHot ImagesHot ImagesHot ImagesHot Images

Tuesday, October 27

Low Rider dan Chopper MIO MODIFIKASI

Junaidi Saputra from Medan, North Sumatra, try to develop more low flow rider modifications. Indeed, judging from the look of his Yamaha Mio Sporty, a strong impression that only lengthen modifikator axle which is characteristic of low-rider. But, if the scrutiny right, there is an experiment that looked at it skutik garputala logo.

"As shown on the front and rear wheels, a long follow-up," said Junaidi, builder Admair Thula (AT) which is based in Medan. Total length of the motor to be 3.5 meters. That is, dimensions Mio delay of about 1 meter.

Long retreat, retreat, said Junaidi, to 32 cm. This does not include the end of the outer tire. However, there are unique on the retreat, withdraw it. When the construction is typically shaped letters "H", here he made a model "J".

"To be strong due to rim and engine load, the material is taken from galvanized," he explained. This effort shall thumbs up. Imagine, with the rear wheel of a super-wide, the device remains in the middle. If viewed from the tire and rim application, then surely this Mio into Bobber style.

To adjust the back of the already overly stretch, re-house CVT reformed. Way, that part was cut and added to plates 8 cm to match the back, though not quite fit the position because it was too out of place.

Front wheel chopper-like models in the Harley-proved difficult to maneuver. Turning radius is very small like a chopper-style motorcycle HD. Changes made by sliding out and replace komstir triangular shaped enggak again straight, but it resembles a "V".

When asked to roads with berziga-zagging in between rows of cones, the motor was trouble. In fact, the driver must be off the foot many times. However, testing his courage Junaidi to take the road more than 5 km.

Honda PCX 125cc Cruiser Scooter

Honda PCX 125cc Cruiser Scooter

Honda will be introducing a new scooter archetypal for the ASEAN and all-around bazaar soon, alpha with Thailand area it will be produced. The new Honda PCX is powered by a 4-stroke water-cooled 125cc distinct butt agent that can do 50km per liter on the ECE 40 MODE cycle. It’s not activity to be cheap, as the PCX will be positioned as a high-end but high-value model. The Honda PCX appearance an “idling stop system” area the agent can shut off automatically back the scooter comes to a complete stop. This can advice save ammunition burning while you delay for a cartage ablaze or for whatever acumen you’re chock-full – cartage jams don’t assume to affectation that abundant of a botheration for these bikes.

Sunday, September 27

KAWASAKI D-TRACKER X 250

Technical Specification Kawasaki D-Tracker x 250

Engine type: 4-Step, DOHC, 4 valves
System: liquid
Number of cylinder & Content: 1 fruit & 249cc
Step x Diameter: 72.0 x 61.2 mm
Comparison of Compression: 11:1
Maximum power: 18.0 kW / 9000 rpm
Torsi Maximum: 21 Nm / 7000 rpm
Injection system: Keihin F001
Starter System: Electric Starter
Transmission type: 6 speed return


Gigi final comparison: 2.786 (39/14)
Number of Ratio Roda Gigi: 7.429 in Top Gear
Ignition system: TIS
Front Suspension: telescopic
Rear Suspension : mono shock
Length x Width x Height: 2130 X 795 X 1125 mm
Wheel bearing distance: 1,420 mm
Lowest distance to the ground: 265 mm
Front brake: Hidrolic, Single-Disc
Rear brake: Hidrolic, single-Disc
Front Wheel: 70/100-19
Rear Wheel: 90/100-16
Weight empty: 139 kg /

Kawasaki KLX 150S

Kawasaki KLX 150S Picture

Kawasaki KLX 150S Technical Specification:

Engine type: 4-Step, SOHC, 2 valves
System: air
Number of cylinder & Content: 1 fruit & 144cc
Step x Diameter: 58.0 x 54.4 mm
Comparison of Compression: 9,5:1
Maximum power: 8.60 kW / 8000 rpm
Maximum Torsion: 12 Nm / 6500 rpm
Carburettor: Keihin NCV24
Starter System: Kick Starter & Electric Starter
Transmission type: 5 speed return
Comparison Roda Gigi: To-1: 2.917 (35/12)
To-2: 2.000 (32/16)
To-3: 1.474 (28/19)
4th: 1.182 (26/22)
To-5: 1.000 (24/24)
Gigi final comparison: 3.143 (44/14)
Number of Ratio Roda Gigi: 9.051 in Top Gear
Ignition system: DC-CDI
Idle Speed: 1400 (± 50) rpm
Type of frame: Perimeter, Box Section, Stainless Steel High
Rear Suspension : UNION TRAK ® linkage system and single shock with 5-way preload adjustability / 7.1 in.
Length x Width x Height: 1975 X 760 X 1080 mm
Wheel bearing distance: 1,285 mm
Lowest distance to the ground: 250 mm
Suspension Front: 33mm telescopic fork / 7.1 in.
Front brake: Hidrolic, Single-Disc
Rear brake: Hidrolic, single-Disc
Front Wheel: 70/100-19
Rear Wheel: 90/100-16
Julur Front: 310 mm
Julur Rear: 380 mm
Type / Length helm: Handle Bar / 760mm
Turn the corner: 43 ° to 43 ° left and right
Maximum weight: 228 kg
Weight empty: 108 kg

Thursday, August 27

Minerva Sachs Megelli Sport 250CC


The new motor sport will try to fight in Indonesia market which is the three variant of Minerva new products. The three are Minerva Megelli Sachs 250, 250M and 250S.
The engine of new Minerva was made by Sachs while the performance was touched by Megelli. So clarity the new Minerva is join venture between Sachs and Megelli.
The price of Minerva Megelli Sachs 250, 250M and 250S in Indonesia is between 25.9-28.9 million rupiah.
Minerva Sachs Megelli Sport 250 CC Spec Overview:

Engine Type SOHC, Air Cooled
Bore x Stroke (mm) 72,5 x 59,8
Displacement (cc) 247
Compression Ratio 11,2:1
Carburettor Type MV 30 P
Max Power (Hp) 20,5/8500
Max Torque 18/8000
Lubrication System Forced & Wet Sump
Clutch: Wet Type & Multi Plates
Gear Transmission 5 Speed
Gear Shift Pattern: 1-N-2-3-4-5
Gear Ratio :
1st 2,769
2nd 1,722
3rd 1,318
4th 1,125
5th 0,962
Generator Spole
Ignition CDI
Battery Type 12V 9 AH
Head Light L/H = (R,L) = 35 w
Tail Light 0,23 w
Stop Light 0,58 w
Winker 5 w
Frame Type Multi Twin Spar Trellis Configuration
Steering Head Angle 30o
Suspension Front Telescopic
Suspension Rear Mono Shock
Wheel Front Rim 2.75x17
Wheel Rear Rim 3.50x17
Type Front 100/70 x 17
Type Rear 130/70 x 17


Chain :
Pitch 520
Number Of Line 104
Fuel Tank Capacity 11 Lt
Height 1.040mm
Length 1.990mm
Widht 825mm
Seat Height 800mm
Wheel Base 1.350mm
Ground Clearance 200mm
Weight 123kg